How to frame a pictorial carpet at the workshop level
In this article, we briefly mention how to make a PVC frame and how to frame a carpet:
Step 1: Cutting the profile of PVC frame by a guillotine cutting machine
![](https://www.opaldeco.com/wp-content/uploads/2023/07/cutting-the-profile-of-pvc-frame.jpg)
Step 2: Sewing the parts of the frame with a V-shaped stapler machine
![](https://www.opaldeco.com/wp-content/uploads/2023/07/Sewing-with-a-V-shaped-stapler.jpg)
Step 3: Adding the internal frame as well as corners’ supporting boards by an air stapler (finalizing the frame)
![](https://www.opaldeco.com/wp-content/uploads/2023/07/519-GOLDEN.png)
Step 4: Sewing the carpet to frame by an air stapler
![](https://www.opaldeco.com/wp-content/uploads/2023/07/Sewing-the-carpet-to-frame-with-an-air-stapler-1.jpg)
Step 5: Attaching a piece of wire as a hanger by an air stapler
![](https://www.opaldeco.com/wp-content/uploads/2023/07/back-of-the-pictorial-carpet.jpg)
Step 6: Combing and folding the fringes and fixing them using wide scotch tape to the back of the frame (finalaizing the framed pictorial carpet)